RHINOGATE™ knife gate valves use a specially engineered, one-piece, elastomer gland packing.
The gland packing is firm. It encompasses incredible sheer strength. Its texture is smooth and slippery. These are the traits of a material that has been purpose-designed for an extremely demanding application.
The one-piece elastomer gland packing is slid over the gate and pushed down into the chest area of the valve where it sits firmly onto the RHINOGATE™ liner.
The gland follower is then slid over the gate and torqued down onto the gland packing – causing its deformation. It is this deformation that provides the long-lasting seal between the gate and the RHINOGATE™ liner preventing media discharge to the atmosphere.
RHINOGATE™ knife gate valves utilise special “live loaded” belleville washers to ensure even loading across our one-piece elastomer packing. Once torqued up our live loaded gland will not come loose, nor need repeated tightening like other conventional knife gate valves.
The gland follower is torqued down onto special belleville washers. Downward pressure provided by the cap screws is converted into a constant and live-loaded state. This constant state ensures pressure is evenly distributed across the one-piece elastomer gland packing and eliminates the need for consistent tightening of the gland follower.
Rebuild a knife gate valve for around 15% of the cost of a new valve. Rhinogate Slurry Isolation Knife Gate Valve Engineered for maintenance and reliability.
Get updates on product releases & updates.
Trademarks & Copyright 2024 John Valves Pty Ltd | All Rights Reserved | SEO