Engineered with easy interchangeability in mind, the RHINOGATE™ knife gate valve consists of just 8 pieces and is extremely simple and easy to understand, operate, and maintain.
The one-piece liner, gate and gland are sandwiched between two split body halves of ductile iron and is totally leak-free and well-enclosed in a neat package.
Its superior quality, solid construction, and brilliant design, allow for the valve to be rebuilt on-site, for only around 15% of the cost of a new valve.
A RHINOGATE™ knife gate valve is considered an investment as the valve can go back into service, time and time again. The days of throw-away valves have come to an end.
| Body | Powder-Coated Ductile Iron |
| Liner | Polyurethane |
| Gland Packing | One Piece Elastomer |
| Gland Follower | Powder-Coated Ductile Iron |
| Yoke | Powder-Coated Ductile Iron |
| Stem | Stainless Steel 316L |
| Clevis | Stainless Steel 316L |
| Fasterners | Stainless Steel 316L |
Size Range:
100NB (4″) – 300NB (12″)
Larger sizes on request.
Pressure Rating:
1.03 MPa (10.3 bar) (150psi)
Face to Face Standard:
MSS-SP81
Shut off performance:
Exceeds ASNI-FCI 70-2 Class VI.
Zero downstream leakage.
Zero atmosphere leakage.
Temperature Rating:
70°C (158°F)
Flange Drilling:
ANSI B16.5 Class 150
AS 2129 Table D and E
BS 4504 PN16
Others available on request
Place of Origin:
Made in Australia
Testing:
Shell Test: Hydrostatically tested to 1.5 CWP (cold working pressure)Resilient Seat Test: Hydrostatically tested to 1.5 CWP (cold working pressure)
Test certificates availble upon request.
Easily Field Repairable
One piece liner allows for quick and easy replacement.
One Piece, “Live Loaded” Packing
Easily replaceable packing offers zero leakage to the atmosphere and minimal maintenance.
Full Bore, Cavity Free, Bi-Directional Design
Full bore design eliminates turbulence and offers bi-directional versatility.
“U” Shaped Perimeter Sealing
“U” shaped perimeter seal design offers bubble tight shut off performance.
Rebuild the for approx 15% of the cost of a new valve
Liner and packing can be replaced over and over again easily and cost-effectively.
MSS-SP 81 Face to Face
Fully lugged flange faces and its MSS-SP 81 design ensure replacing your in-line valves is a simple operation.
The heart of the RHINOGATE™ knife gate valve is its special once-piece, field-replaceable polyurethane liner.
With its full-bore design – fluid media is fully contained and does not come in contact with any other part of the body. Sealing of the gate is handled within the liner’s U-shaped perimeter core – offering bi-directional operation and complete bubble-tight downstream isolation.
Its cavity-free seat also eliminates pockets where slurry can build up and prevent the gate from closing. Built-in “Double V” scrapers assist in scraping the gate clean, each time it is cycled and outside seal rings eliminate the need for flange gaskets when installing the RHINOGATE™ in-line.
Tough One-Piece Polyurethane Construction
Built-in Seal Rings Eliminate Need from Flange Gaskets
Built-In Double V Scrapers to Clean Gate of Solids During Cycling
Rhinogate knife gate valves come in a wide range of actuator configurations
Various gate materials:
Feedback options include:
All valves are able to be locked in the open or closed postion. Lock-out pins include a large handle for easy action and a storage bracket is included on the yoke to store the pin when it is not being used
Rebuild a knife gate valve for around 15% of the cost of a new valve. Rhinogate Slurry Isolation Knife Gate Valve Engineered for maintenance and reliability.
Get updates on product releases & updates.
Trademarks & Copyright 2024 John Valves Pty Ltd | All Rights Reserved | SEO